If you are in possession of an iPhone/iPad which is running on iOS 10 then this post is for you. A Safari Jailbreak, specifically for iOS 10, known as totally-not.spyware.lol has been released and you can utilize the same to jailbreak your iOS device. It is, actually, a semi-untethered Safari browser-based jailbreak for 64-bit iOS devices which are running on iOS 10. Developed and released by Ben Sparkes, it is, actually, a kernel-exploit and utilizes the services of pwn_i8.js and v0rtex exploits to do its trick.
Now no more permanent locking of your iPhone due to multiple incorrect passcode entries. Check NoMoreDisabled iOS Cydia jailbreak tweak.
Please note that Spyware Jailbreak has bootstraps for both doubleh3lix and Meridian jailbreak tools. Hence, if you are running any of these jailbreak tools on your iOS 10 iPhone/iPad; the jailbreak will by default get initiated and installed through Safari Browser itself.
Jailbreak your iOS 10.x Devices from Safari Browser Through Spyware Jailbreak
Features & Benefits of Safari Semi Untethered Jailbreak: Hence, it is recommended that you have one of these up and running on your iOS 10 iPhone/iPad. Now, before we move ahead, it is essential to know the features and benefits of the Spyware browser-based jailbreak mechanism.
- You needn’t worry if your device is running on A9 processor or below. This is because this jailbreak includes KPP bypass for iOS devices with A9 processor or below.
- To implement this jailbreak you don’t require owning a computer or do any side load process through Cydia Impactor. All you need to make sure is that you have doubleh3lix or meridian jailbreak up and running over your iOS 10 device so that the jailbreak can be loaded directly through the Safari Browser.
- Spyware jailbreak can be loaded immediately, once again, post expiration of the certificate of the jailbreak. All you need to do is to re-install the same exploit again and you are good to go. Hence, the resigning problem, indeed, gets solved with this jailbreak.
[Update*]: Please do have doubleh3lix or Meridian jailbreak present on your iOS device as, according to some user comments on Reddit, the jailbreak doesn’t work for them. However, they were missing on doubleh3lix or Meridian and post installing the same the jailbreak worked without any glitch.
Get BetterCCXI Cydia Tweak – Enhance Music & Connectivity Control Center Modules.
It is recommended that you don’t try this jailbreak mechanism on devices which are not running on iOS 10-10.3.3. Even if you try to the website will flash a message stating that the Spyware is compatible only with iOS 10.
Steps to Jailbreak iOS 10 – 10.3.3 [iPhone/iPad] Using Spyware Browser-Based Jailbreak
- Please note that you require to be connected to the internet for this jailbreak to work.
- Open Safari Browser and navigate to the Spyware Jailbreak website.
- You will see a screen similar to the iPhone sliding lock screen. All you need to do is to slide the ‘Slide for Spyware’ slider completely.
- Next, a message will be displayed stating ‘Running exploit…”.
- Be patient and allow the jailbreak mechanism to do its part.
- Your device will automatically respring and you are done.
Spyware Browser-Based Jailbreak | Issues, Queries & Answers
1: ‘The Jailbreak shows ‘Incompatible’ web page even though I am on iOS 10.3.3′
Please note that you might be using the incorrect URL. You need to use http://totally-not.spyware.lol and not http://totally-not.spyware.lol/incompatible.html. Note the difference. The word ‘incompatible’ is not present in the correct URL.
2: ‘Does it has 32-bit support?’
The jailbreak won’t run on 32-bit devices. It has been made specifically for 64-bit devices.
3. ‘Jailbreak is not working even after several reboots. All things are fine’
Do you have Meridian bootstrap installed? If not then install the same from Midnight repository and post rebooting your iPhone or iPad please run the jailbreak once again.
4. ‘Why its called semi-untethered?’
This is because after every reboot you need to jailbreak your device once again. However, since you will be utilizing browser-based jailbreak you don’t need PC or Cydia Impactor for the purpose. Hence it is the closest to being completely untethered.
5. Incompatible Devices as of now.
There are some issues with KPPless issue, as of now, this semi untethered jailbreak is not working on iPhone 7 and iPhone 7 Plus. iOS 11 and iOS 10.2.1 devices are needs to wait for some more time to get this fantastic and easy jailbreak update.
Spyware Safari Jailbreak for iOS 10-10.3.3 64-Bit iOS & No PC
So, that was all regarding the latest browser-based Spyware Jailbreak for 64-bit iPhone/iPad running on iOS 10-10.3.3. If you have any queries or questions please utilize the comments section, provided below, for that.
Also, please go through the following interesting posts:
- Rollectra 1.1 With Jailed Support | Unjailbreak Your Jailbroken iPhone.
- Unlock Any Locked iPhone [iOS 11.4.1] By Changing R-SIM & ICCID.